Removing Internal Components - Bosch rexroth ctrlX HMI DE0015 Operating Manual

34 / 52
Device dismantling for disposal
. .
Fig. 24: Disassembling switch panel

10.6.3 Removing internal components

1. Remove the six screws of the mainboard.
2. Remove the four screws of the intermediate support.
3. Remove the three screws of the interface cover plate.
4. Remove the four screws of the connection terminal blocks of the keypad.
5. Remove the four screws of the connector panel of the touchscreen.
6. Remove the two screws of the connector panel of the display.
5
Fig. 25: Removing internal components
Bosch Rexroth AG
1
2
6
ctrlX HMI DE0015, DE0021
4
3
5
1
2
3
6
4
R911405731, Edition 03