Housing Dimensions Of The Display; Device Mounting Of The Display; Fastening To The Support Arm Adapter (Vesa) With Vas09.1-001 - Bosch rexroth ctrlX HMI DE0015 Operating Manual

22 / 52

Device mounting of the display

10.2

Housing dimensions of the display

5
1
Fig. 8: Front view of the display
Table 21: Housing dimensions of the display in diameters
Display size Device height
①
15" (tube) 333
15" (VESA) 333
21" (tube) 420
21" (VESA) 420
10.3 Device mounting of the display
The display is intended for a VESA-compliant mounting (VAS09.1-001) and for the tube mounting
(VAS09.1-001). For all required and matching couplings for the tube mounting, refer to
"Support arm adapter " on page

10.3.1 Fastening to the support arm adapter (VESA) with VAS09.1-001

The DE displays are provided with four M4 treads in square arrangement of 100 x 100 on their rear side
to fasten a support arm adapter.
The provided screws can be used for VESA fastenings up to a material thickness of 1.0 mm.
Use longer screws for VESA fastenings with a greater material thickness!
Bosch Rexroth AG
2
4
Device width Device depth
② ③
402 160
402 87
546.8 160
546.8 87
12.
ctrlX HMI DE0015, DE0021
3
Display width Display height
④ ⑤
346 195
346 195
478 270
478 270
⮫ Chapter 5.6
R911405731, Edition 03