Table of Contents
Advertisement
MON152CL | Instruction Manual | Installation
3
OPERATION
3.1
Front Panel Controls (Fig. 1)
Input (#1) Selects CVB1, CVB2, Y/C and VGA.
Display of CVB1, CVB2, S-video and PC.
Menu (# 2) Selects on-screen display (OSD), enters data,
saves settings
Multifunction Controls
(# 3) &
(#4)
Control (#3)
Brightness Select
Within OSD Menu:
Moves cursor downward.
First push selects Brightness or Contrast
functions for adjustment.
(#5) &
(#6)
Control (#5)
• Brightness Level Decrease
• Contrast Level Decrease
• Adjustment Decrease
Within OSD Menu:
or decreases adjustment levels;
to the right or increases adjustment levels.
(#7)
Power On/off control for LCD Flat Panel
Display
Amber LED: indicates power on to base,
power off to LCD Display
Green LED: indicates power on to base, power
on to LCD Display
Flashing Amber LED: indicates "Sleep mode" on
VGA input.
Front Panel Lock-out Feature
Push
,
,
lock or unlock front panel access.
Bosch Security Systems | 22 September 2003
FUNCTION
Control (#4)
Contrast Select
Moves cursor upward;
FUNCTION
Control (#6)
• Brightness Level Increase
• Contrast Level Increase
• Adjustment Increase
Moves cursor to the left
Moves cursor
,
, keys simultaneously to
3.2
On-screen Display (OSD) Menu (Multilanguage)
Press Menu (Fig. 1 item 2) for the following menu options:
3.2.1
Video mode
Tint
Adjusts tint level; for best results, adjust until
skin color is natural.
NOTE: Applicable to NTSC only; not
available in PAL format.
Color
Adjusts the overall color intensity of the screen.
Default
Enables factory default settings for brightness,
contrast, tint, color, and volume.
Language
Selects the language for the OSD text,
available in English, French, German, Italian,
and Spanish, Dutch and Portuguese.
Channel Title
Allows selection and enabling of 16-character
title per input channel.
3D Comb Filter Enable comb filter to attain the best video
performance.
NOTE: If monitor is connected with a
line-lock camera directly, this function should
be in "manual mode" to attain the better
resolution.
AGC
Automatic gain control.
NOTE: The factory default setting is "Auto".
Under Scan
Enable or Disable the Under Scan function.
PIP Menu
Selects picture-in-picture application.
Power on option Selects the video input to be displayed upon
power-up after a power interruption. The
factory default setting is CVB1.
Volume
Adjusts the volume for the audio inputs.
Exit
Exit the OSD Menu and returns to standard
monitor display.
3.2.2 VGA mode
Auto set
Automatic adjusting of H position, V position,
phase and clock values.
Display setting Adjusts the H position, V position, fine tune,
sharpness, and track.
NOTE: Track means, section of filter for
best performance
Color temperature Selects the color temperature of the LCD
monitor.
Language
Selects the language for the OSD text,
available in English, French, German, Italian,
and Spanish, Dutch and Portuguese.
Volume
Adjusts the volume for the audio inputs.
Default
Enables factory default settings for brightness,
contrast, tint, color, and volume.
PIP menu
Selects picture-in-picture application.
Power on option Selects the video input to be displayed upon
power-up after a power interruption.
The factory default setting is CVB1.
VGA timing
Display information of H frequency, V
frequency, pixel clock, and resolution
information.
Exit
Exit the OSD Menu and returns to standard
monitor display.
NOTE: OSD Main Menu disappears from the display after 15
seconds if no selections or adjustments are made.
EN | 12
Advertisement
Table of Contents
