Indicators & Displays
When applicable, the reverse or neutral indicators come on when
you turn the ignition switch ON (q) and remain on until you shift out
of reverse or neutral.
If one of these indicators does not come on when it should, have
your dealer check for problems.
Display Check
When the ignition switch is turned ON (q), the multi-function display
(1) will temporarily show all the modes and digital segments so you
can make sure the liquid crystal display is functioning properly.
The displays are identified in the table on page 20 with the words:
Display Check.
If any part of these displays does not come on when it should, have
your dealer check for problems.
(1)
(1) multi-function display
Instruments & Controls
19