Checking & Adding Oil
Refer to Safety Precautions on page 97.
Check the engine oil level each day before operating your ATV and
add if needed.
Before riding your ATV, check the engine oil level.
1. Park your ATV on a firm, level surface.
2. Start the engine in a well-ventilated area and let it idle for 3 – 5
minutes. Stop the engine and wait 2 – 3 minutes.
3. Remove the oil fill cap/dipstick (1) from the front crankcase cover
and wipe it clean.
4. Insert the oil fill cap/dipstick without screwing it in, then remove
the oil fill cap/dipstick and check the oil level. The oil level should
be between the upper level mark (2) and the lower level mark (3)
on the oil fill cap/dipstick.
Engine Oil
Servicing Your Honda
(cont'd)
115