Yamaha DTX-PRO Reference Manual page 81

MENU Button
4.
(File)
Select the file you want to load.
4-1.
Use the " " and "
you want to load. Only those files matching your selected file type will be available for loading.
4-2.
For OneKit, select the kit you want OneKit to load to.
Use the " " and "
the file you want to load. When the kit contains user waves, the user waves are also loaded.
5.
Press the "LOAD" button ([F3]).
The Load confirmation screen appears.
6.
Press the "YES" button ([F1]) to load.
The message shown below appears during the Load process.
Press the "CANCEL" button ([F3]) during the Load process and the screen returns to step 2.
Do not disconnect the USB flash drive from the [USB TO DEVICE] terminal or turn off the power to the PRO series modules while
the file is being loaded. Doing so may cause the PRO series modules to malfunction, or corrupt memory in the USB flash drive.
"Completed." appears when the Load process is complete, and the screen returns to step 2.
" buttons ([F1] and [F2]) to move the cursor to "File," and then use the [–][+] controllers to select the file
" buttons ([F1] and [F2]) to move the cursor to the kit number, and then use the [–][+] controllers to select
DTX-PRO DTX-PROX Reference Manual 81