Yamaha DTX-PRO Reference Manual page 34

MENU Button
Voice
The Voice parameters shown with A, B, C, or D in the upper right of the screen are for layers, while the voice parameters shown without are for
input sources.
MENU/Kit Edit/Voice
Screen Parameter Settings
Category Refer to the Data
List (PDF)
VoiceNumber Refer to the Data
List (PDF)
Import Wav
VoiceTune -24.0 – 0.0 –
+24.0
(0.1=10 cents)
VoiceDecay -64 – 0
VoicePan L63–C–R63
VoiceFilter -64 – 0 – +63
VoiceQ -64 – 0 – +63
Description
Specifies the voice category.
Specifies the voice number.
Imports audio files.
When you press the button below "ENTER"
([F3]), the IMPORT screen appears.
Sets the tuning of the voice assigned. 0.1 cor-
responds to 10 cents.
Sets the decay (the time it takes for the sound
to fade away to silence) for the voice assigned.
The smaller the value, the crisper the sound
produced becomes.
Sets the stereo pan of the voice.
Sets the filter cutoff frequency for the voice
assigned. Negative values produce a darker
sound, while positive values produce a brighter
sound.
Sets the Q (filter resonance) for the filter of the
voice assigned. Increases the signal near the
Filter Cutoff Frequency adding character to the
sound.
DTX-PRO DTX-PROX Reference Manual 34