Functions - Yamaha DTX-PRO Reference Manual

Drum trigger module
Hide thumbs Also See for DTX-PRO:
Table of Contents

Advertisement

Settings for live performances

Functions

 Pad Function
PRO
During a live performance, you can strike a pad to switch to another kit or to start or stop the click sound.
PROX
During the live performance, you can strike a pad to proceed to the next step in a Live Set, or to start or stop the audio playback
or click sound.
Setting
MENU/Utility/Pad/Pad Function
Live Set (audio songs, click settings, etc.)
PROX
You can use the internal click to add pre-counts, or play click sounds (at a fixed tempo) for playing back audio files.
Setting
LIVE SET/SETTING/EDIT/Offset Time, PreCount, CountOff, Wav&Click Sync
LED Rotary Faders (FX, MIDI CC, etc.)
PROX
You can set an Insertion Effect type for each pad and control the amount of effect in real-time.
Setting
Fader select FX/InsType, FX/InsDepth
You can control external devices and DAW software in live performance situations by sending MIDI Control Change messages.
Setting
Fader select CUSTM/MIDI CC
PROX
Triggers (multiple trigger setup)
The conditions for the crosstalk occurring may vary depending on the venue. You can quickly change the crosstalk settings right at the
venue, and store the settings as a user trigger, while keeping the original set of trigger settings unchanged.
Change settings in TRIGGER/SETTING → Store → Switch trigger settings on the top screen for the TRIGGER mode
Setting
You can change the trigger setup for each kit.
Setting
MENU/Kit Edit/Other/TrgSetupLink
 Click (Count Off and Click Out)
For checking the tempo of the song before the performance, you can set the click to be automatically turned off after playing one or two
measures.
Setting
CLICK/SETTING/ClickCountOff
PROX
PROX
The click sounds can also be output to Indiv Out.
Setting
Fourth page on MENU/Utility/Indiv Out
 Importing sampled sounds
You can assign up to 10 sampled audio files to a user voice and set each of them to be played at different velocities.
Setting
MENU/Job/User Voice
By using four layers, you can use up to 40 sampled audio files and set each of them to be played at different velocities.
Setting
MENU/Kit Edit/Voice
The same setting is available for steps in Live Sets.
DTX-PRO DTX-PROX Reference Manual
134

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtx-prox

Table of Contents