Yamaha DTX-PRO Reference Manual page 127

LIVE SET Mode
Screen Parameter Settings
(Kit) off, kit number
(Tempo) off, 30.0–300.0
tempo
(Click) off, 1, 2 (number
PreCount of measures)
CountOff off, 1, 2, stop
(Audio file) off, 001–1000
Wav&Click off, on
Sync
Offset Time 0 ms–
99sec999ms
(1 ms increments)
Description
Register the kit for the step. The kit does not
change when this setting is off.
Register the tempo for the step. When "off,"
the click sound will not play even when you
press the "PLAY" button. If the audio file is also
"off," the "PLAY" button will not be shown.
Sets the number of PreCount measures.
When the audio file and the click sound are set
to be played simultaneously, PreCount is
added before the song starts.
Sets the click sound to be played for one mea-
sure or for two measures. When set to "off" ,
the click sound continues to play.
When set to "stop" , the click will stop when the
PreCount ends.
Prepare an audio file and save to a USB flash
drive as described in "Preparing an Accompa-
niment Song (Audio File)" under "Overdub
Recording Your Performance onto an Accom-
paniment Song" in the DTX-PROX Owner's
Manual.
When on, pressing the "PLAY" button starts
the audio file and click sound in sync.
Set Tempo to a value that matches the tempo
of the audio file, set Offset Time to adjust the
timing for starting the playback, and set Pre-
Count.
Use this parameter to set the offset time.
Adjust this setting when the audio file playback
and the click sound are out of sync.
To fix this problem, first find the time length
from the beginning of the audio file to the first
beat of the song, and then set the time length
value to this parameter.
The offset timing determines the timing of the
first beat of the click, as well as the timing for
the PreCount.
DTX-PRO DTX-PROX Reference Manual 127