Prox Fader Select Custm; Configuring Custom Settings - Yamaha DTX-PRO Reference Manual

Fader Select CUSTM
PROX

Configuring Custom Settings

The settings shown below can be customized.
(Master EQ, Phones EQ gain, volume of each click timings, and send settings on MIDI control change)
1.
Use the fader select knob to select a parameter.
Screen
2.
Use the LED rotary faders [1] to [7] to adjust the settings.
Use [1] to [5] for MEQ, [1] to [4] for HPEQ, [1] to [6] for ClickVol and [1] to [7] for MIDI CC.
Parameter Settings
MEQ Gain -12 – 0 – +12
HPEQ Gain -12.0 – 0.0 –
+12.0
CLICK Vol 0–10
([F1])
MIDI CC
SETTING ([F1])
CC No. CC01–CC95
MinValue 0–127
MaxValue 0–127
MIDI Ch 1–16
Description
Use this parameter to boost or cut the center-fre-
quency levels of the Lo, LoMid, Mid, HiMid, and Hi
MEQ Freq settings.
MEQ parameters other than Gain can be adjusted
in MENU/Master EQ.
Use this parameter to boost or cut the center-fre-
quency levels of the Lo, LoMid, HiMid, and Hi
HPEQ Freq settings.
HPEQ parameters other than Gain can be adjusted
in MENU/Phones EQ.
Adjusts the volumes of each click timing.
Switches between Human voice 1 and 2. These
two use different counting methods.
Set the MIDI Control Change to send with the LED
rotary faders.
Use this parameter to set the Control Change num-
ber.
Sets the minimum value.
Sets the maximum value.
Sets the MIDI channel to output to.
DTX-PRO DTX-PROX Reference Manual 122