NEC UNIVERGE DT920 Series User Manual page 31

TO ENABLE/DISABLE DTMF TONE
The procedure below shows how to enable/disable DTMF Tone.
1.
Press Menu key while terminal is in an idle state.
□
2.
Select 1 User Settings.
□
3.
Select 2 Talk.
□
4.
Select 2 DTMF Tone
□
5.
Select 0 Automatic,
(see the following table).
No. Menu Items
Follow the setting on the System.
0 Automatic
If no setting is made in the System, the
default setting (DTMF=ON) is applied.
Follow the setting on the terminal (OFF).
1 Disable
Follow the setting on the terminal (ON).
2 Enable
■For the setting on the System, contact the system
administrator.
■The enabled item is highlighted.
□ □
1 Disable or 2 Enable
Descriptions
TO SET KEY TOUCH TONE
The procedure below shows how to set Key Touch Tone. Key
Touch Tone is a tone generated when the digit keys are pressed
while the terminal is off-hook.
1.
Press Menu key while terminal is in an idle state.
□
2.
Select 1 User Settings.
□
3.
Select 2 Talk.
□
4.
Select 3 Key Touch Tone.
□
5.
Select 0 Automatic,
□
■When
0 Automatic is set, the default setting is applied.
■The enabled item is highlighted.
31
TERMINAL SETUP
□ □
1 Disable or 2 Tone.