Omron ZS Series Communication Command Reference page 44

Section 3
Setting Value Obtaining and Changing Command
and (8000h + 1h (Number of Elements)) 00000003h (Data to be written),
Command is: 02h 02h C000h 0000h 8001h 00000003h.
To this command, if the response is shown as below:
02h 02h 0000h
It indicates a normal end.
(2) In the same manner as above,
When 02h 02h (C000h + 09h (Data No.)) 00h(Unit No.) 00h (CH No.),
and (8000h + 1h (Number of Elements)) 00000001h (Data to be written),
Command is: 02h 02h C009h 0000h 8001h 00000001h.
To this command, if the response is shown as below:
02h 02h 0000h
It indicates a normal end.
ZS Series
3-14
CompoWay/F Communication Command Reference