Operation Instructions; List Of Operation Instruction Commands; Commands And Responses - Omron ZS Series Communication Command Reference

Section 2

Operation Instructions

About General Information of Communication Commands

Operation Instructions

Provides operation instructions to controllers.

List of Operation Instruction Commands

Instruction Name
Complete INIT
DATA SAVE
CLEAR
CLEAR (which clears banks) initializes current banks' sensing settings and measurement settings.
Settings of other banks and system settings are not initialized.
Complete INIT initializes all settings (settings of all banks and system settings).
Example: To execute Complete INIT of the 2CH controller, assign a command as follows:
[Related information１]＝02h
MRC SRC
30h 05h

Commands and Responses

Command
Instruction
MRC SRC
"30" "05"
2 bytes 2 bytes 2 bytes 2 bytes
Elements
Instruction Code
Related Information 1
Related Information 2
ZS Series
2-12
CompoWay/F Communication Command Reference
MRC SRC Instruction
Code
30h 05h 55h
30h 05h 57h
30h 05h 58h
Instruction Related
Code Information 1
55h 02h
Related
Related Information 2
Code
Information 1
4 bytes
Specify commands depending on the instruction to be executed.
Specify the channel No. of the controller related to the command.
Example: In the case of 2CH, specify "02."
Usually, setting other than "0000" is not accepted.
Related
Information 1 Information 2
<Machine No.> 0000h
<Machine No.> 0000h
<Machine No.> 0000h
Related
Information 2
0001h
Details
Related