Clarion DXZ385 Owner's Manual page 23

Operations Common to Each Mode
Entering message information
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
The factory default setting is "WELCOME TO
CLARION".
2-1. Select "MSG INP".
3-1. Press the [ ] button.
3-2. Press and hold the [BND] button for 1
second or longer to clear the old message.
3-3. Press the [x] or [v] button to move the
cursor.
3-4. Press the [BND] button to select a
character type. Each time you press the
[BND] button, the character type changes
in the following order:
Capital letters Numbers
Capital letters...
3-5. Press the [w] or [z] button to select the
desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [
seconds or longer to store the message in
memory.
Press and hold the
second or longer to cancel the input
message. Then press and hold the
button for 2 seconds or longer to store the
message and the message return to default
setting.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
The factory default setting is "ON".
2-1. Select "SCROLL".
3-1. Press the [w] or [z] button to select "ON"
or "OFF".
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
When you want to see the title again, in the
title mode, press and hold the [DISP] button
for 3 seconds or longer to scroll the title.
Symbols
] button for 2
[BND
] button for 1
[ ]
Setting the dimmer control
You can set the dimmer control "ON" or "OFF".
The factory default setting is "ON".
2-1. Select "DIMMER".
3-1. Press the [w] or [z] button to select "ON"
or "OFF".
Setting the external amplifier
The factory default setting is "OFF".
2-1. Select "A-CANCEL".
3-1. Press the [w] or [z] button to select "ON"
or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Setting the car speaker output for the
cellular phone
The factory default setting is "RIGHT".
To output the telephone calls, set the cellular
phone interrupt to "ON".
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
2-1. Select "TEL-SP".
3-1. Press the [w] or [z] button to select
"RIGHT" or "LEFT".
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
23
DXZ385USB