12. SPECIFICATIONS ... 28 1. FEATURES Flip-down console MP3 and WMA compatible with ID3-TAG display “Z-ENHANCER” sound customization & “MAGNA BASS EX” dynamic bass enhancement DXZ366MP Be sure to unfold and read the next page. 叫叭ゲ甶秨並綷弄下頁。 반드시 다음 페이지를 펴서 읽으십시오.
/ 讽 FLIP DOWN PANEL (陆秨面狾)砆 / 플립다운 패널이 열린 상태 ゴ秨時 Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. 猔種: 綷弄各彻時叫叭ゲ甶秨此頁並綷弄玡面的瓜。 주: 반드시 이 페이지를 펴서 각 장을 읽을 때 앞면 도표를 참고하십시오. DXZ366MP...
CD/MP3/WMA mode. • Press the button to scroll the title during the CD- text play, while in the CD/MP3/WMA mode. DXZ366MP [ BND ] button • Switch the band, or seek tuning or manual tuning while in the radio mode.
• Press the button to switch to the ADJ mode. • Press and hold the button for 1 second or longer to switch to the TV picture mode or VTR ( external ) picture mode. ] lever • Select a station. DXZ366MP...
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC- TURER WILL VOID THE WARRANTY. DXZ366MP 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.
Do not use compact discs that have large scratch- es, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage. Do not expose compact discs to direct sunlight or any heat source. DXZ366MP...
∗ If the flip down panel does not open fully, gently open it with your hand. 3. Pull the DCP toward you and remove it. 4. Close the HOLD FLAP. DXZ366MP CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP.
• When replacing the battery, insert properly, with + /- polarities oriented correctly. • Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery. • Dispose of used batteries properly. DXZ366MP...
[ RPT ] No function. [ RDM ] No function. ∗ Some of the corresponding buttons on the main unit and remote control unit have different functions. DXZ366MP CD Changer CD/MP3/WMA DVD Changer Play the first track. Move the next disc in Top play.
1. Press the [ A-M ] button to select the adjustment mode. The mode switches as follows each time the [ A-M ] button is pressed: BASS TREB mode CD/MP3/WMA mode DVD changer mode Radio mode... Title display Clock display Previous DXZ366MP...
3. When the adjustment is complete, press the [ A-M ] button several times until the function mode is reached. DXZ366MP Adjusting the fader 1. Press the [ A-M ] button and select “FAD 0”. 2. Turning the [ ROTARY ] knob clockwise emphasizes the sound from the front speakers;...
1. Press the [ PS/AS ] button. 2. When a desired station is tuned in, press the [ PS/AS ] button again to continue receiving that station. ] lever upward or downward ] lever upward or downward ] lever to tune into a desired DXZ366MP...
In any mode, press the [ ISR ] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ ISR ] button again to return to the previous mode. DXZ366MP CD/MP3/WMA Mode Operations What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
Page 15
Just pressing the [ ] button ejects the disc even if the power to the unit was not turned on. 1. Press the [ OPEN ] button to open the FLIP DOWN PANEL. Play MP3/WMA Play CD Play MP3/WMA DXZ366MP...
CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. DXZ366MP Loading 8 cm CD ∗ No adapter is required to play an 8 cm CD. ∗ Insert the 8 cm CD into the center of the insertion slot.
CD-R with their file names beginning with play sequence numbers such as “01” to “99”, depending on your CD writer. For example, a medium with the following folder/ file hierarchy is shown below. DXZ366MP...
2. To select a track, press the [ upward or downward. Top function The top function resets the CD player to the first track of the disc. Press the [ BND ] button to play the first track ( Track No. 1 ) on the disc.
If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. ∗ The factory default setting is “ON”. “MSG “DIMMER” ] button DXZ366MP...
Page 20
∗ The factory default setting is “ON”. 2-1. Select “AUTO SCROL”. 3-1. Turn the [ ROTARY ] knob to select “ON” or “OFF”. DXZ366MP • ON: To scroll automatically. • OFF: To scroll just 1 time when the title was changed or the [ T ] button was pressed for 1 second or longer.
4. Press and hold the [ BND ] button for 1 second or longer. All characters in the title disappear. 5. Press and hold the [ or longer to clear the title and cancel title input mode. Symbols ] button for 2 seconds ] button for 2 seconds DXZ366MP...
CAUTION CD-ROM discs cannot be played from every CD changer, itʼs depended on the model. DXZ366MP Displaying CD titles This unit can display title data for CD-text CDs and user titles input with this unit. ∗ Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz.
1. Press the [ ADJ ] button to switch to the adjustment selection display. 2. Press the [ ] lever upward or downward to select “TV AREA <E>”. 3. Press the [ ] button. 4. Turn the [ ROTARY ] knob to select the reception area. DXZ366MP...
3. Turn the [ ROTARY ] knob clockwise to set to “ON” or counterclockwise to set to “OFF”. • ON: Sets the diver setting to ON. • OFF: Sets the diver setting to OFF. 4. Press the [ ADJ ] button to return to the previous mode. DXZ366MP...
1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). 2. If the sound is muted again, consult our service department. Measure DXZ366MP...
Page 26
Noise is generated or noise is mixed with sound. Sound is bad directly after power is turned on. Wrong filename DXZ366MP Cause MP3/WMA files are Write MP3/WMA files onto the disc properly. absent in a disc. Files are not recognized Use MP3/WMA files encoded properly.
This is a failure of DVD mechanism and consult your store of purchase. Retry or replace with a non-scratched, non- warped-disc. Eject the disc then reload it properly. Set the correct Parental level. Eject the disc and replace correct region code disc. Measure Measure Measure DXZ366MP...
Bass Control Action ( 100 Hz ) : ±14 dB Treble Control Action ( 10 kHz ) : ±14 dB Line Output ( with A/C 1 kHz, 10 kΩ ) : 1.8 V DXZ366MP General Power Supply Voltage: 14.4 V DC ( 10.8 V to 15.6 V allowable ) , nega-...