Table of Contents
Advertisement
5.2
Commissioning the motor
NOTICE
Protect the motor from overload
Do not exceed or undershoot limit speeds, e.g. during operation with a backstop.
NOTICE
With a backstop
Running in the wrong direction of rotation can damage the geared motor.
Check the direction of rotation before starting up.
Turn the input side or motor over manually.
Use the phase sequence to check the direction of motor rotation and swap the two external
conductors if necessary.
NOTICE
For brakes with lockable manual release
No braking effect for lockable manual brake release lever. The brake is then permanently
released.
Before commissioning the geared motor, ensure that the brake can be applied.
We recommend you unscrew and remove the manual brake release lever.
Note
With a brake motor
Before commissioning, check the uniformity of the rated air gap of the brake – in a current-
free state – in 3 places around the circumference, using a feeler gauge between the
armature disk and the solenoid.
Note
It may be necessary to perform additional checks and tests in accordance with the specific,
on-site situation.
BA 2320
Operating Instructions, 02/2015, 70000004023775
Commissioning
5.2 Commissioning the motor
45
Advertisement
Table of Contents
