Table of Contents
Advertisement
Disposal
Incorrect disposal of used oil is a threat to the environment and health
After use, oil must be taken to a used oil collection point. The addition of foreign material
such as solvents and brake and cooling fluid is prohibited.
Avoid prolonged contact with the skin.
Empty the used oil from the gearbox. The used oil must be collected, stored, transported and
disposed of in accordance with regulations. Do not mix polyglycols with mineral oil.
Polyglycols must be disposed of separately.
Please observe country-specific laws. Under German law, oils with different disposal codes
may not be mixed with one another to allow optimal treatment of the oil (§4 VI Used Oil).
Collect and dispose of used oil in accordance with regulations.
Remove oil spillages immediately with an oil-binding agent in compliance with environmental
requirements.
Dispose of the housing parts, gears, shafts, and roller bearings of the geared motor as steel
scrap. The same applies to grey cast iron parts, if no separate collection is made.
The worm wheels are made partly from non-ferrous metal. Dispose of them accordingly.
Dispose of the packing material according to regulations or recycle it.
Table 9- 1
Type of oil
Mineral oil
Polyglycols
Polyalphaolefins
Biologically degradable oils
BA 2320
Operating Instructions, 02/2015, 70000004023775
WARNING
Disposal codes for gear oils
Name
CLP ISO VG220
CLP ISO PG VG220
CLP ISO PG VG460
CLP ISO PAO VG68
CLP ISO PAO VG220
CLP ISO H1 VG460
CLP ISO E VG220
Disposal code
13 02 05
13 02 08
13 02 06
13 02 07
9
63
Advertisement
Table of Contents
