Front Panel Leds And Rear Panel Interfaces - Draytek Vigor2900V Series Quick Installation Manual

1.3 Front Panel LEDs and Rear Panel Interfaces

1.3.1 Vigor2900V
LED Indicators
ACT (Activity)
QoS
Phone
(FXS1,FXS2)
VPN
Printer
WAN
LAN
(P1, P2, P3, P4)
Rear Panels
Factory Reset
Status
blinking
The router is powered on and running properly.
on
The QoS function is active.
on The phone is off hook (the handset of phone is picked up).
blinking A phone call is incoming
on The VPN function is active.
on
The USB interface printer is ready.
orange
A normal 10Mbps WAN link is ready.
green A normal 100Mbps WAN link is ready.
blinking Ethernet packets are transmitting.
A normal 10Mbps connection is through its corresponding port.
orange
green
A normal 100Mbps connection is through its corresponding port.
blinking Ethernet packets are transmitting.
Connect to the USB printer.
Connect the included power adapter to the power outlet.
Connect to the analog phone for VoIP communication.
Connect to the local networked devices.
Connect the cable/DSL modem to access the Internet.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and keep for
more than 5 seconds. When the ACT LED begins to blink rapidly, release the
button. Then the router will restart with the factory default configuration.
Descriptions
Descriptions
3