Table of Contents
Advertisement
Example 1:
If Tom gives you a SIP URL as sip:63065@fwd.pulver.com then you can input
the number just as the previous figure, except you can change any number in the
Phone Number field.
Example 2:
If Aaron gives you a sip url as sip:aaron@203.69.175.19 then you can enter the
DialPlan as:
Phone Number:
Name:
IP Address / Domain:
Example 3:
If Calvin give you an IP address 203.69.175.16 only, and it is not in your
DialPlan, you still can use keypad on the phone to dial as
#203*69*175*19#
4.2 SIP Related Function Setup
The port number is used to send/receive SIP message for building a
SIP Port
session. While the default value is 5060, you can change it to other
number. However, this situation needs other party to change
simultaneously to the same number.
Registrar
You can enter domain name or IP address of SIP Registrar server. For
example, iptel.org or 195.37.77.101 is identical. You have to apply an
account of SIP Registrar server before you can use it. However, it is
not necessary to use sip registrar server function in order to use VoIP
function.
Use Register check this box then you can use register function to register your
Vigor with an SIP registrar server.
Name
You can enter a name or a number in this field. This field is the name
part of SIP url.
Password
Enter the password when you use a SIP registrar server which needs
password.
Expire Time The time duration that SIP registrar server keeps your registration
record. Before the time expired, Vigor will issue another register
message to registrar server again.
1234 (any number you like)
aaron
203.69.175.19
19
Advertisement
Table of Contents
