Table of Contents
Advertisement
1.3.4 Vigor2900Vi
LED Indicators
ACT (Activity)
blinking
on
ISDN
blinking
on
Phone
(FXS1,FXS2)
blinking
VPN
on
Printer
on
orange
WAN
green
blinking
orange
LAN
green
(P1, P2, P3, P4)
blinking
Rear Panels
Connect to the USB printer.
Connect the included power adapter to the power outlet.
Connect to the analog phone for VoIP communication.
Connect to the local networked devices.
Connect the cable/DSL modem to access the Internet.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and keep for
Factory Reset
more than 5 seconds. When the ACT LED begins to blink rapidly, release the
button. Then the router will restart with the factory default configuration.
Status
The router is powered on and running properly.
The ISDN network is correctly setup.
A successful remote connection on the ISDN BRI B1/B2 channel.
The phone is off hook (the handset of phone is picked up).
A phone call is incoming.
The VPN tunnel is launched.
The USB interface printer is ready.
A normal 10Mbps WAN link is ready.
A normal 100Mbps WAN link is ready.
Ethernet packets are transmitting.
A normal 10Mbps connection is through its corresponding port.
A normal 100Mbps connection is through its corresponding port.
Ethernet packets are transmitting.
6
Descriptions
Descriptions
Advertisement
Table of Contents
