Table of Contents
Advertisement
1. Enable Wireless LAN: Check the box to enable wireless function.
2. Mode: Select an appropriate wireless mode.
- Mixed (11b+11g): The radio can support both IEEE802.11b and
IEEE802.11g protocols simultaneously.
- 11g-only: The radio only supports IEEE802.11g protocol.
- 11b-only: The radio only supports IEEE802.11b protocol.
3. Scheduler: Set the wireless LAN to work at some time interval only. You may
choose up to 4 schedules from the 15 schedules which are defined under
Advanced Setup > Call Schedule Setup. Please refer to the detailed manual
on the attached CD. The default setting is always working.
4. SSID and Channel: The default SSID is "default". We suggest you change it
to a particular name. In this case, SSID was changed to "DrayTek".
- SSID (Service Set Identifier): It is used to name the wireless LAN, and
must be the same content in client PC/notebook wireless card(s). SSID can
be any text numbers or various special characters.
- Channel: A wireless channel for the router. The default channel is 6. You
can change it to more appropriate one if the selected channel is under
serious interference.
5. Hide SSID: Check it to prevent from wireless sniffing and make it harder for
unauthorized clients to join your wireless LAN.
6. Click OK to save settings.
14
Advertisement
Table of Contents
