Table of Contents
Advertisement
16.2.1.3
To Remove Main Electronic Controller
Figure 3
16.2.1.4
To Remove Discharge Grille
8 Pull out the main
electronic controller
and power electronic
controller halfway.
5 Detach the Earth wire
7 Remove screw to remove
terminal board complete
and earth wire.
6 Detach the indicator
connector CN-DISP then
remove the indicator
complete.
12 Then pull the discharge grille
downward gently to dismantle it.
screw.
11 Pull out to remove the drain hose
Figure 5
68
9 Detach 4 connectors as labeled from the
electronic controller. Then pull out main
controller gently.
10 Detach AC303 (WHT) from PCB, then
detach the RY-PWR (Black and Brown)
from terminal board.
Figure 4
Discharge Grille
(behind the discharge grille)
from the discharge grille outlet.
AC303
RY-PWR
CN-FM
CN-STM1
CN-STM3
CN-RCV
CN-TH
Advertisement
Table of Contents
