11.2.4.1
Wire Stripping and Connecting Requirement
Wire stripping
No loose strand
when inserted
RISK OF FIRE
JOINING OF WIRES MAY
CAUSE OVERHEATING
WARNING
AND FIRE.
Do not joint wires.
OR
Indoor/outdoor
connection
terminal board
5 mm
or more
(gap between wires)
OR
35
Conductor
Conductor
fully inserted
over inserted
ACCEPT
PROHIBITED
OR
Use complete wire without joining.
Use approved socket and plug with earth pin.
Wire connection in this area must follow to national wiring rules.
Conductor not
fully inserted
PROHIBITED