Table of Contents
Advertisement
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
16.2 CS-PC18TKF CS-PC24TKF
16.2.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
16.2.1.1
To Remove Front Grille
16.2.1.2
To Remove Horizontal Vane
2 Remove 3 caps and 4 screws at the
bottom of discharge vane and 1 screw
at the front grille.
2 hooks (left hand side)
WARNING
3 Hold both sides of the front grille and
Figure 1
Figure 2
67
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
4 Removing the control
board cover by
releasing the 2 hook.
Advertisement
Table of Contents
