Panasonic CS-PC12TKF Service Manual page 49

12.6.2 Manual Control

When the vertical airflow direction is set to Manual using the remote control, the automatic airflow is released and
the airflow direction louver move up and down in the range shown in the diagram.

The louver can be adjusted by pressing the button to the desired louver position.

When stop operation using the remote control, the discharge vent is reset, and stop at the closing position.
(For PC12TKF)
Inner Vane
Reference Point
Upper Limit for
Cooling Mode
(10°)
Outer Vane
Reference Point
Upper Limit for
Cooling Mode
(20°)
0°
10°
15°
20°
30°
Closed
Stopper
Position
0°
20°
32°
44°
Cooling/Dry Mode (Airflow
direction auto or manual)
Lower Limit (56°)
45°
Cooling/Dry Mode (Airflow
direction auto or manual)
Lower Limit (45°)
43.85°
50°
56°
49
110.01°
Stopper
Closed
Position
134.59°