Husqvarna P 520DX Operator's Manual page 30

3. Hold the front cover of the steering column in a
vertical position and remove it.
4. Install in opposite sequence.
To open the engine cover
1. Remove the rubber straps on both sides of the
engine cover.
2. Open the engine cover rearward.
Note:
To remove the engine cover fully, remove
the bolts by the hinges.
To remove the service lid
1. Turn the 2 screws ¼ turn counterclockwise to open
them.
2. Pull the service lid rearward to release it from the
hooks.
30
To remove the cover of the fuse box
1. Turn the 3 screws ¼ turn counterclockwise and
remove the cover.
To remove the right side cover
1. Remove the 5 screws and remove the side cover.
To remove the service hatch
1. Remove the 2 screws and lift off the service hatch.
1593 - 002 - 22.12.2020