Jensen MP1314 Owner's Manual page 20

USB Operation
The unit contains a USB interface (16). The USB interface is located on the front
panel of the unit beneath the protective cover (14). You can connect an USB
memory device using this interface.
1. Lift the protective cover to reveal the USB connector.
2. Locate the USB connector on the front of the radio.
3. Insert the USB device into the USB connector. The unit will read the audio files
on the USB device automatically.
4. In the unit is in another mode of operation press the MODE button (22) to
select USB mode.
Note: The unit can only support a standard USB memory device. When connecting
an MP3 player and it uses normal batteries (non rechargeable batteries), the
batteries should be removed from the MP3 player first and then connected to the
USB interface. Otherwise, damage to the batteries may result.
When in USB play mode, be sure not to remove the USB driver from the USB
interface.
Memory Card Operation
There is a memory card interface (24) on the housing of the unit which is accessed
by removing the front panel. When you insert a memory card in the memory card
interface, the unit will search the MP3 files in the card and start to play MP3 files
automatically.
SD card operation is the same as the USB memory device described above. In the
unit is in another mode of operation press the MODE button (22) to select the SD
card mode.
20
Front Panel Cover
AUX Connector
USB Connector
MP1314