Jensen MP1314 Owner's Manual page 11

MP1314
5. 3 (RPT) Button
When playing an audio CD press the button to continuously repeat the same
track. Press the button again to turn the repeat function off. When playing
MP3/WMA disc, press the button to select one of the following modes: RPT
ONE (repeats the current track), REP DIR (repeats the tracks contained in the
directory) and REP OFF which cancels the repeat function.
6. Next ( ) Button
During disc play, press this button to quickly select the end of a particular
track in the forward direction. With each press of the button, the next higher
track number will be selected as shown on the display panel. Press and hold
the button to advance rapidly in the forward direction as indicated by the
elapsed time display.
7. Power On/Off ( )/MUTE Button
Press to turn the unit ON. Press and hold to turn the unit OFF. When listening
to audio, press this button momentarily to mute the volume from the system.
(MUTE will appear on the display panel). Pressing the button again or
adjusting the Volume Knob will return the audio to the volume level setting in
use before the mute function was activated.
8. EQ (Equalizer) Button
The Equalizer applies preset sound effects to the unit's audio output signal.
Pressing the EQ button allows selection of one of five operating modes:
Classic, Pop, Rock, EQ Off and Flat.
9. DISP Button
If the radio is tuned to the AM band pressing this button will display the
current time setting and AM frequency. If the radio is tuned to the FM band
pressing this button will display the current time setting, FM frequency and
the PTY category.
10. Volume Knob
Rotate to increase or decrease the volume. When pressed the knob also
performs the Select function. This is used to select the audio function (volume,
bass, treble, balance or fade) to be adjusted. Pressing the volume knob once
will set the unit for volume adjustment. (VOL will appear on the display panel,
followed by the setting number). Pressing the volume knob additional times
will select bass adjustment (BAS on display panel), treble adjustment (TRB),
balance (BAL L-R), fader (FAD F-R), loudness (LOUD) and volume (VOL)
again. The display will return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
11. PTY/ENTER Button
Press the PTY button to access the program type related search function.
When the PTY function is enabled, turning the volume knob will display a
category (news, sports, talk, weather, jazz, oldies, country, Top 40, classic
rock, soft rock, public, etc.) The unit will search for radio programming that
contains the desired topic.
The button is also used to confirm a setting (ENTER) by pressing the button.
11