Whirlpool AKG668 Instructions For Use And Installation page 30

AKG668 Installation & Instructions for Use
If no gap occurs between the
back edge of the shelf and the
wall behind
recommended that a gap of A T
L E A S T 30mm
shortening the shelf.
INSERT THE APPLIANCE AND
SECURE INTO POSITION
Open the grill door and secure
appliance into position, using the
2 No.8 x 25mm (Silver) chipboard
screws through the front frame,
ensuring that the appliance is
centrally located.
Take care not to damage the
outer trim or the housing unit.
INSTALLING A WHIRLPOOL
HOB ABOVE THE APPLIANCE
Please refer to the installation
instructions with the hob.
If another manufacturers hob is to
be fitted above this appliance,
please refer to the manufacturer
to ascertain whether it is suitable.
Whirlpool (UK) Limited will
accept no liability for any
damage caused,
instructions in this booklet are
not followed.
the unit, we
is made by
if the
FRONT
OF
OVEN
Gap must be as shown above
INSTALLING
ABOVE THE APPLIANCE.
You may need to fit the inlet
connector adaptor kit (supplied
with the
clearance.
28
approx
80mm
BACK EDGE OF
SUPPORT SHELF
A GAS HOB
oven) to ensure