Whirlpool AKG668 Instructions For Use And Installation page 29

AKG668 Installation & Instructions for Use
METHOD 3.
(Internal height 710mm or more.
NOTE:
You will NOT need the 4 runners
and 2 trims, that are packed with
the oven for this installation.
Remove any fixings, that may
prevent entry of the oven into
housing. The cabinetry should be
kept structurally sound by fixing to
adjacent cabinets,
worktop.
712mm
Housing unit
floor, or
9mm
697mm
6mm
541mm
Method 3 With Housing Unit
When installed in a typical 600mm
deep, built in housing unit, the
false back should be removed
from the housing unit to provide
the necessary
installation.
When the false back is removed,
it is normally the case that the
support shelf for the appliance
leaves a gap between the back
edge of the support shelf and the
wall of approximately 80mm. See
illustration on next page.
560-570mm
Min.
550mm
Min.
710mm
27
depth for