Before You Start Installation - Whirlpool AKG668 Instructions For Use And Installation

AKG668 Installation & Instructions for Use
INSTALLATION INSTRUCTIONS
This appliance is designed for
installing ONLY at a low level, ie.
under a worktop, and it should not
be installed at a high level.
There are three methods for
installing the AKG668.
METHOD 1
Into a space between two base
units, i.e. WITHOUT a housing
unit.
METHOD 2
Into a housing unit, with an
internal height of L E S S t h a n
710mm which can be modified to
obtain the required dimensions.
METHOD 3
Into a housing unit, with an
Quantity
6
12
2
2
BEFORE YOU START
Colour Description
No 8 x 12mm
Silver
Self Tapping Screw
No 8 x 12mm
Black
Chipboard Screw
No 8 x 25mm
Silver
No 8 x 12mm
Silver
Self Tapping Screw
internal height of 710mm or more.
Look at the different ways the
appliance can be installed, on the
following pages, and plan the
installation to suit your situation.
Leave the appliance in the base
tray packaging until you are ready
to install it. Be careful, when you
remove the appliance from the
base tray packaging, not to
damage the outer frame trim.
FIXING SCREWS
The fixing screws are in a
polythene bag in the oven pack.
Depending on the method of
installation, some of the screws
may not be needed.
Chipboard
22
For Fixing
Runners to Appliance
Runners and Side
Trims to Cabinet or
Appliance to Cabinet
Appliance to Side
Trims