Stihl 064 Service Manual page 79

STIHL 064, 066
11.4 Removal and Installation
of Carburetor
Top:
Prying out lateral grommet
Bottom:
Disconnecting fuel hose from
elbow connector
The all-position diaphragm car-
buretor consists of a fuel pump
and the actual carburetor. AI-
though the fuel pump shares a
common housing with the carbure-
tor, it operates as a completely
separate and independent unit.
Troubleshooting chart - see 2.6.
Top:
1 = Mounting nuts
2 = Baffle plate
Bottom:
Disconnecting the throttle rod
- Remove the air filter - see 11.1.
- Pry the lateral grommet off the
adjusting screws and out of the
carburetor box.
- Disconnect the fuel hose from
the carburetor's elbow connector.
- Unscrew the carburetor mounting
nuts.
- Pull the baffle off the studs.
Removing carburetor
- Use a screwdriver to press down the
throttle shaft lever and, at the same time,
detach the throttle rod with pointed nose
pliers.
- Pull the carburetor off the studs - the
elbow connector slips out of the impulse
hose at the same time.
79