Stihl 064 Service Manual page 72

STIHL 064, 066
10. CHAIN LUBRICATION
Pickup Body
10.1
Top:
Oil tank filler cap
Bottom:
Assembly hook 5910 893 8800
Impurities gradually clog the fine
pores of the filter with tiny particles
of dirt. This prevents the oil pump
from supplying sufficient oil to the
bar and chain. In the event of prob-
lems with the oil supply, first check
the oil tank and the pickup body.
Clean the oil tank if necessary.
- Remove the oil filler cap together
with the cap retainer.
- Drain the oil tank.
Top:
Withdrawing pickup body
Bottom:
Pulling pickup body out of hose
- Use assembly hook to withdraw
the pickup body from the oil tank.
Note: Do not stretch the oil hose
too much when withdrawing the
pickup body.
- Hold the oil hose steady and pull
out the pickup body.
Top:
Disconnecting the strainer
Bottom:
1 = Hose
2 = Connector
3 = Strainer
- Use side cutters or similar tool to
remove the strainer from the con-
nector.
- Wash the strainer and pickup
body in white spirit and, if
possible, blow out with com-
pressed air.
- Flush out the oil tank.
Reassemble by reversing the
disassembly sequence.
Important: Always replace any
damaged parts.
72