ADTRAN Async-232 User Manual page 40

Appendix B. AT Commands
Command Echo
E0
E1
Unit Identification
I0
I1
I5
I6
Speaker Options
L
M
Response Messages
Q0
Q1
Result Code Format
V0
V1
Extended Result Codes
X0
X1
Data Compression Control
%C0
%C1
%C2
%C3
Error Correction Control
\N0
\N1
\N2
B-4
Enable command echo
Disable command echo
Identify Hardware
Identify Firmware
Display Last Disconnect Reason
Display the slot and port number
Speaker volume (speaker option accepted but ignored)
Speaker enable (speaker option accepted but ignored)
Response messages enabled (default)
Response messages disabled
Numeric result code form
Verbose result code form (default)
Simple CONNECT message
CONNECT with DTE Bit Rate message (default)
No Compression
MNP5
V.42bis
V.42bis and MNP5 (default)
Disabled
Disabled
Auto reliable link mode (default)
Async-232 Module User Manual
AT COMMAND LIST
Command Echo
61200182L1-1