Table of Contents
Advertisement
Chapter 3. Operation
press Enter on the keyboard. The following paragraphs describe all Modules
menu and submenu options.
ASYNC-232 MENU DESCRIPTION
The following paragraphs (Slt (slot), Type, Menu, Alarm, Test, State, Status, and
Rev (revision)) describe the Modules menu options (see Figure 3-1).
Slt (Slot)
Read security: 5
Displays the number of all the available slots in the ATLAS chassis. Slot 0 refers
to the ATLAS base unit. This field is read-only.
Type
Write security: 3; Read security: 5
Displays the module type installed in the slot or the module type you plan to
install in the slot. If an Async-232 Module is installed, the Type field automati-
cally defaults to Async-16. You can use this field to preconfigure a system before
installing modules by specifying the module that you want to install into each
slot.
Menu
Read security: 5
Displays additional status and configuration menus for the selected module. (To
access the submenus for this item, use the arrow keys to scroll to the Menu col-
umn for the module you want to edit, and press Enter.)
3-2
Refer to the ATLAS User Manual for detailed instructions on how to navigate
through the terminal menu.
Figure 3-1. Modules Menu
If a module is installed, the module type automatically displays the name of the
installed module, and it cannot be set to any other option.
Async-232 Module User Manual
ASYNC-232 Menu Description
61200182L1-1
Advertisement
Table of Contents
