Network] - [Ipv4 Configuration] - Konica Minolta bizhub 225i User Manual

4
4.3.21

[Network] - [IPv4 Configuration]

Configure the IPv4 Configuration of the network.
Configure the settings and click [Apply] to apply the change.
Item
[IP Address]
[Subnet Mask]
[Default Gateway]
[Base Port Number]
[DHCP (APIPA)]
[IP Address in NVRAM]
[Enable DNS Server]
[DNS Server Address]
Tips
To change the settings of the [Network] tab, click [Apply]. After the message [Update Successful] is dis-
played, turn the power off and on. Otherwise, the change in settings is not enabled.
4-34
Description
Specify the IP address for this machine.
Specify the subnet mask of the network to be connected.
Specify the default gateway address of the network to be connect-
ed.
Specify the port number used for RAW print.
Select this item to assign an IP address automatically using the
DHCP server or APIPA (Automatic Private IP Addressing).
Select this item to use a fixed IP address.
Select this check box to use DNS.
If the [Enable DNS Server] check box is selected, specify the IP ad-
dress of the DNS server.
Administrator mode
bizhub 225i
4.3