Main Parts; Specifications - Stihl MS 201 TC-M Instruction Manual

English
– Damage to the machine as a result of using
replacement parts of inferior quality
27.2 Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:
– Saw chain, guide bar
– Drive components (clutch, clutch drum, chain
sprocket)
– Filters (air, oil, fuel)
– Starter mechanism
– Spark plug
– Components of antivibration system

28 Main Parts

2
1
4
10
8
5 9
6
7
18
#
16
17
1 Control handle
2 Throttle trigger lockout
3 Master Control lever
4 Throttle trigger
5 Shutter (winter and summer mode)
6 Spark plug
7 Muffler
8 Chain sprocket cover
9 Chain sprocket
1)
to ISO 11681 +/- 50 rpm
30
3
11
14
12
15
13
19
22
20
21
23
10 Oil quantity control
11 Chain brake
12 Chain tensioner
13 Chain catcher
14 Guide bar
15 Oilomatic chain
16 Spiked bumper
17 Oil filler cap
18 Hand guard
19 Handlebar
20 Starter grip
21 Carburetor box cover
22 Twist lock
23 Fuel filler cap
24 Ring
# Serial number

29 Specifications

29.1 Engine
Single cylinder two-stroke engine
Displacement:
Bore:
Stroke:
Engine power to ISO 7293: 1.8 kW (2.4 bhp) at
1
Idle speed:
29.2 Ignition System
Electronic magneto ignition
Spark plug (resistor type): NGK CMR 6 H
Electrode gap:
29.3 Fuel System
24
All position diaphragm carburetor with integral
fuel pump
Fuel tank capacity:
29.4 Chain Lubrication
Fully automatic, speed-controlled oil pump. Addi‐
tional manual oil flow control
Oil tank capacity:
29.5 Weight
Dry, without bar and chain:
3.7 kg
28 Main Parts
35.2 cc
40 mm
28 mm
10,500 rpm
3,000 rpm
0.5 mm
310 cc (0,31 l)
220 cc (0,22 l)
0458-599-0121-C