Usb Ports; Dvi- Ports; I/O Connections; Audio And Serial Ports - Omron SmartVision MX User Manual

We recommend that you use Category 5 or better wiring and connectors for your network.
NOTE: If you are using a camera with a USB 2.0 connector or with an Ethernet con-
nector that is not designed for PoE, you will need to provide DC power to the cam-
era through a separate cable.

4.2 USB Ports

For a USB 3.0 camera, use one of the USB 3.0 ports.
To attach a USB peripheral, plug the peripheral cable into any one of the USB ports on the
SmartVision MX industrial PC.
NOTE: The bottom-right USB 2.0 port is used for the license dongle, which is
needed for the industrial PC to function. Do not remove the dongle.

4.3 DVI- Ports

To connect a monitor with a DVI connector:
Connect the monitor to the DVI-I port on the SmartVision MX
l
or
Connect the monitor to the DVI-D port on the SmartVision MX.
l
Connecting a VGA monitor requires using the DVI-I port with a user-supplied VGA adapter.

4.4 I/O Connections

8 inputs and 8 outputs are available.

4.5 Audio and Serial Ports

The Audio In, Audio Out, and the two RS232(/485) ports are fully functional, but are not used
for vision processing.
Chapter 4: Connectors and Indicators
SmartVision MX User's Guide, 14362-000 Rev. B
Page 21 of 30