LG MULTI F Installation Manual page 38

WIRING
Controller Options
Ceiling cassette indoor units wireless handheld remote controller (Model No. AKB73757604), but optional LG-supplied wired controllers are
available. After all wiring is connected to the indoor and outdoor units, test the accompanying remote controllers for performance. As always,
follow all safety warnings and notes when operating the units using the remote controller. Additionally, all of the Multi F / Multi F MAX (with or
without LGRED) outdoor units can use the following controllers when accompanied with the PI-485 VNet Accessory:
• AC Smart
• ACP
Wireless Handheld Controller
Figure 53: AKB73757604 Wireless Handheld Controller.
1
2
3
4
5
6
7
8
9
38
• BACnet
®
• LonWorks
®
Operation Mode Sequence
Cooling Mode
Auto Mode/Changeover
Dehumidification Mode
10
Heating Mode
11
12
Fan Mode
13
14
15
16
17
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
BACnet is a registered trademark of ASHRAE.
®
LonWorks is a registered trademark of Echelon Corporation.
®
Table 20: AKB73757604 Wireless Handheld Controller Functions.
1
Button
Label
1 Vane Angle Button: Sets the angle to each vane.
Function Setting Button: Sets or clears auto clean, smart
2 clean, electric heater, or individual vane angle control
3 On / Off Button: Turns the power on/off.
Jet Cool: Sets the unit to super high fan speed when in cooling
4
Left / Right Air Flow Button (optional): Sets the desired left /
5
right (horizontal) air flow direction.
Up / Down Air flow Button: Stops or starts louver movement,
6
and sets the desired air flow direction to up or down.
7 On Time Button: Sets the time when the operation begins.
8 Sleep Timer Button: Sets the sleep mode operation.
Set / Clear Button: Sets or cancels the timer, also sets the
9
10 Plasma Button: Starts or stops plasma-purification functions.
Room Temperature Setting Button: Raises or lowers
11
temperature setpoint in cooling and heating operation.
12 Operation mode selection button: Selects the operation mode.
Indoor Fan Speed Button: Changes the fan speed to one of
13
four choices: low, medium, high, and chaos.
Room Temperature Check Button: Displays / checks the room
14
15 Off Timer button: Sets the time when the operation ends.
Time Setting (Up / Down) / Light Button: Sets the timer and
16
adjusts the brightness of the LED.
17 Reset Button: Resets the remote controller.
Wireless Handheld Controller for the four-way ceiling cassette indoor units is also referenced by Model
1
No. PQWRHQ0FDB.
Depending on the indoor unit model, some functions will not be supported or displayed.
2
F
MULTI
F
MULTI MAX
Description
functions.
mode.
current time.
temperature.
2