Installation; Unpack And Inspect - LG MULTI F Installation Manual

INSTALLATION

Unpack and Inspect

Unpack and Inspect for Freight Damage
CAUTION
•
•
•
•
Unpack and Inspect for Freight Damage
1. Before opening the shipping container, verify the correct unit is included as described in the note above.
2. Place the box on a solid surface right side up.
3. Cut the white reinforced nylon straps.
4. Open the box and fold back all four flaps.
5. Remove any protective cardboard / Styrofoam
6. The walls and top panels are not attached to the bottom of the box. Lift the cardboard carton by the flaps and remove the box walls and
top and place it to the side.
7. Remove the moisture barrier plastic bonnet.
8. Check the unit nameplate data and model number. Verify the unit voltage, and capacities are correct before proceeding.
9. Locate and retain all included parts and accessories in the box.
10. Using two people, carefully lift the unit and inspect for freight damage.
the frame only. If damage is found, repack the unit as it was received in the original container.
16
top sheets and place to the side.
®
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
DO NOT lift by the refrigerant piping or drain pipe stub. Lift by
F
MULTI
F
MULTI MAX
-