Power Lamp And Alarm Lamp Flash Alternately - Canon PIXMA iP6310D Series Quick Start Manual

Troubleshooting
Problem Possible Cause
Ink absorber
almost full
"Error No.:
1700/1711"
A specified period
of time has elapsed
"Error No.: 2001"
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
Automatic print
head alignment
"Error No.: 2500"
failed

POWER Lamp and Alarm Lamp Flash Alternately

Problem Possible Cause
POWER Lamp and An error that
Alarm Lamp Flash requires contacting
Alternately the Customer Care
Center may have
occurred
28
The printer has a built-in ink absorber to hold the ink used during print head
cleaning, for example. This error message indicates that this ink absorber is
nearly full.
Press the OK OK button to clear the error so you can continue printing. Before the OK OK
ink absorber becomes completely full, contact the Customer Care Center.
When you experience this error, you will need to call for servicing to replace the
ink absorber and to check the printer for proper operation.
Disconnect the camera cable, and reconnect it.
Note Note Depending on the model or brand of your PictBridge compliant
Note Note
device, you may have to select a print mode before connecting the
device.
You may also have to turn on the device or select Play mode
manually after connecting the device to the printer.
Perform necessary operations according to the instruction
manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer.
PictBridge-compatible digital camera or digital video camcorder can be
connected to your printer for Direct Printing.
Refer to " " " " An Error Message is Displayed on the LCD" " " " in the Direct Printing Guide .
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply. Plug the printer back in and turn the
printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
Try This
Try This