Loading Envelopes - Canon PIXMA iP6310D Series Quick Start Manual

Loading Envelopes

Use either European DL or US Comm. #10 size envelopes.
The address is automatically rotated and printed out.
• Do not use envelopes with embossed or treated surface, with a
double flap or pressure seals, with sticker flaps.
• Select either DL Env.
according to the envelope size you are using.
• If you do not select Media Type
wrong way round.
(2) Pinch the paper guide and slide it against
the left side of the envelope.
Note • When printing the envelope, set the paper thickness lever to the
right.
• When using a special paper to inverse the print result, open the
printer properties dialog box and select the Rotate 180 degrees
check box on the Page Setup
(3) Select Envelope Envelope Envelope Envelope in Media Type
Page Size. Page Size
Page Size Page Size
(4) Select Landscape Landscape in Orientation
Landscape Landscape
For the printer driver setting, see "Printing with Windows
"Printing with Macintosh Printing with Macintosh Printing with Macintosh" on page 13. Printing with Macintosh
DL Env. DL Env. or Comm. Env. #10 DL Env. Comm. Env. #10 Comm. Env. #10 in the printer driver Comm. Env. #10
Media Type correctly, the print out results in the
Media Type Media Type
Fold the envelope flap shut.
Page Setup Page Setup Page Setup tab.
Media Type, and then select DL Env. Media Type Media Type
Orientation.
Orientation Orientation
Printing with Windows" on page 11, or Printing with Windows Printing with Windows
Basic Printing
(1) Align the envelope
against the right side of
the auto sheet feeder.
Set the envelope with its
flap facing down on the
left side.
A maximum of 10
envelopes can be loaded
at one time.
Printing direction
Rotate 180 degrees
Rotate 180 degrees Rotate 180 degrees
DL Env. DL Env. DL Env. or Comm. Env. #10 Comm. Env. #10 in Comm. Env. #10 Comm. Env. #10
7