Related Manuals for Canon 9315A001
Summary of Contents for Canon 9315A001
-
Page 1: Table Of Contents
Quick Start Guide Table of Contents Preface Shipping Materials Introduction Setting Up Preparing the Printer Connecting the Printer to the Computer Installing the Print Head Loading Paper Installing the Printer Driver Aligning the Print Head Basic Operations Printing with Windows Printing with Macintosh Print Head Maintenance Appendix... -
Page 2: Exif Print
® International ENERGY STAR Program ® As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY STAR guidelines for efficiency. ® The International ENERGY STAR Office Equipment Program is a global program that promotes energy saving through the use of computer and other office equipment. -
Page 3: Preface
Preface Shipping Materials Thank you for purchasing a Canon Bubble Jet Printer. Check that all the following items are in the box. If anything is missing or is damaged, contact your Canon Authorized Dealer or Sales Representative. Printer Direct Printing Guide Setup Software &... -
Page 4: Setting Up
2 Connecting the Printer to the Computer Use a USB cable. Recommended: Canon or other computer manufacturer cable, up to 5 meters in length. • If your computer has an earth connection, make sure that this is attached. • If you do not intend to use the printer for a long period of time, unplug the power cord from the... - Page 5 Follow the steps below to install the printer driver correctly. 1 1 1 1 Ensure that the printer and the computer are switched off. 2 2 2 2 Connect the cable. If the Add New Hardware Wizard or Found New Hardware Wizard screen appears when carrying out the following operations, click Cancel and turn off the computer.
-
Page 6: Installing The Print Head
3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. -
Page 7: Print Head
5 5 5 5 Raise the lock lever. lock lever Do not touch internal parts other than the lock lever. 6 6 6 6 Remove the protective cap from the print head. print head electrical nozzles contacts • Do not touch the print head nozzles or electrical contacts. -
Page 8: Installing The Ink Tanks
Installing the Ink Tanks • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. •... - Page 9 5 5 5 5 Use the same procedure to install the PhotoCyan Cyan Black (BCI-6PC) (BCI-6C) (BCI-6BK) other ink tanks in their appropriate slots. Check the labels to make sure that each tank is in the correct position. • Only install the ink tanks in the positions specified by the labels.
-
Page 10: Loading Paper
4 Loading Paper This section describes how to load paper in the sheet feeder. When performing the print head alignment, you need to load paper in the sheet feeder. Loading A4/Letter-sized Plain Paper in the Sheet Feeder 1 1 1 1 Pull out the paper support and the paper support paper output tray as shown left. -
Page 11: Installing The Printer Driver
5 Installing the Printer Driver If you are printing with only Direct Print, skip this chapter and go to “Aligning Print Head – Operation Panel” on page 20. Installing the Printer Driver – Windows • Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be correctly installed. -
Page 12: The Screen
3 3 3 3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. • If the CD-ROM does not run automatically, click Start and select My Computer, and then double- click the CD-ROM icon. For non-Windows XP users, double-click My Computer in the Windows screen, and the CD-ROM icon. - Page 13 7 7 7 7 When the screen shown on the left appears, turn the printer on. If the printer is recognized, the printer driver will be automatically installed. If the connection is not recognized, refer to the section “Notes on Handling the USB Interface (for Windows Users)”...
-
Page 14: Installing The Printer Driver – Macintosh
When the screen shown on the left appears, click Exit. When Restart is displayed, ensure the Restart the system now (recommended) check box is selected, then click Restart. To view the User’s Guide, double-click the User’s Guide short-cut icon on the desk top. Installing the Printer Driver –... - Page 15 4 4 4 4 Double-click PIXMA iP6000D 290.pkg. 5 5 5 5 Click Continue. 6 6 6 6 Read the License Agreement and click Continue, then click Agree. 7 7 7 7 Select a destination to where you want to install the printer driver, and click Continue.
- Page 16 Software installation is complete. Restart your computer. Ensure that the printer is added on the Printer List with Printer Setup Utility (Print Center when using Mac OS X v.10.2.x). If not, add the printer on the list. For more information about the operations, refer to the Mac Help.
- Page 17 Select a destination to where you want to install the memory card utility, and click Continue. Click Install. Enter an administrator name and a password, then click OK. When you have forgotten the administrator name and/or password, click mark and follow the instructions in Mac Help.
-
Page 18: Aligning The Print Head
6 Aligning the Print Head This operation must be carried out when using the printer for the first time. Aligning the print head positions allows you to print without shifts in the color registration. • The print head can be aligned also from the printer itself. With the printer on, load a sheet of A4/ Letter-sized plain paper in the sheet feeder. - Page 19 5 5 5 5 Read the message and click Print Head Alignment. It takes about 60 seconds to start printing. Do not open the cover while printing. Clicking Check Setting allows you to print the current settings and finish the print head alignment. 6 6 6 6 If a message warning you not to perform other operations appears, click...
-
Page 20: Click Utility
Aligning the Print Head – Macintosh For Mac OS 9.x users, refer to the Printer Driver Guide for Mac OS 9 for instructions on how to align the print head. 1 1 1 1 Double-click the hard disk icon where the printer driver was installed, the Applications folder, and the Utilities folder. - Page 21 7 7 7 7 Ensure the pattern shown on the left is printed. The print head is aligned automatically. The printer is now ready to use. In the following cases, automatic print head alignment may not work properly. • The ink tanks are not installed securely./Ink tanks have run out of ink.
- Page 22 Aligning Print Head – Operation Panel 1 1 1 1 Press the Menu button. 2 2 2 2 Use the buttons to select Tool box and then press the OK button. The tool box menu is displayed. 3 3 3 3 Use the buttons to select Auto head align and then press the OK...
-
Page 23: Basic Operations
• If you detect smoke, unusual smells or strange noises around the printer, immediately switch the printer off and always unplug the printer. Contact your local Canon service representative. • To avoid injury, never put your hand or fingers inside the printer while it is printing. - Page 24 4 4 4 4 Ensure that the proper lamp of the sheet feeder lamp paper source is lit. cassette lamp If not, press the paper feed switch on the printer. 5 5 5 5 To start printing, click Print. Printing will start in a few moments.
-
Page 25: Basic Print Settings
(This may not appear in Windows XP or Windows 2000. If this happens, click Start then select All Programs (or Programs) - Canon PIXMA iP6000D - Guide). (7) ? Click this to change the cursor shape to ?. By clicking on the item’s name with this ? cursor, an explanation will be displayed. -
Page 26: Printing With Macintosh
Printing with Macintosh Adjusting the print settings according to your needs allows you to produce better quality prints. Printing 1 1 1 1 Open the Page Setup dialog box in your application. On the File menu, click Page Setup. Check the application’s users manual for the actual procedures. -
Page 27: Page Setup
Page Setup From the Page Setup dialog box, specify the paper size settings. Select paper size you wish to use. Basic Print Settings For the best print quality, specify the minimum requirement settings in the Print dialog box. Select Quality & Media from the pop-up menu to change the display of the dialog box. To get the best results, ensure that you select the type of media loaded in the printer when printing on paper other than plain paper. -
Page 28: Print Head Maintenance
Print Head Maintenance If Blurring Occurs or If a Specific Color Does Not Print Perform print head cleaning to improve the print quality. Ensure that the printer is turned on and follow the instructions below. • Windows Open the printer driver settings screen and click the Maintenance tab. Click Cleaning. See page 16 for details on how to open the setting screen. -
Page 29: Appendix
(1) Load the CD-ROM in your computer, and click short-cut icon on the desk top, or click Start and the OS X folder. select All Programs (or Programs), Canon (2) Double-click the Manual folder. PIXMA iP6000D Manual and User's Guide. -
Page 30: Specifications
3 ppm Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 215.9 mm/8.5 in) Resident print control mode: Canon extended mode Receive buffer: 56 KB Interface: USB / Direct Print Port / IrDA 1.2 (JPEG only) Acoustic noise level: Approx. -
Page 31: Print Quality
Supported recording formats: JPEG (DCF/CIFF/Exif 2.21 or earlier/JFIF), TIFF (Exif compliant), DPOF compliant Camera Direct Print Canon “Bubble Jet Direct” Compatible Paper: Card #1 (Photo Paper Pro 4" x 6"/101.6 x 152.4 mm), Card #2 (Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss, or Glossy Photo Paper 4"... - Page 32 *1 When settings cannot be made on the camera, or when “Standard Setting” is selected, the printer's settings will be applied to print. *2 If using a Canon PictBridge-compatible camera, you can select it. Applications Included in the CD-ROM Package...
- Page 33 For Macintosh • Use a Macintosh series computer equipped with USB interface on which Mac OS 9.x or Mac OS X v.10.2.1 or later can operate. • USB interface • CD-ROM drive • Available hard-disk space for printer driver installation Mac OS X v.10.2.1 or later: 100 MB Mac OS 9.x: 30 MB...
-
Page 35: Regulatory Information
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza... - Page 36 The following ink tanks are compatible with this printer. For details on ink tank replacement, refer to "Print Head Maintenance" in this guide. QA7-3394-V01 XXXXXXXX ©CANON INC.2004 PRINTED IN THAILAND...