Loading Rolls In The Printer - Canon imagePROGRAF iPF650 Basic Manual

Loading Rolls in the Printer

Load rolls in the printer as follows.
• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these
areas are dirty, we recommend cleaning them in advance. (→
1
Press the Load button.
2
Press ▲ or ▼ to select Load Roll Paper , and then press
the OK button.
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.
3
Positioning your hands as shown, open the Roll Cover .
4
Holding the Roll Holder fl ange (a), rest the Roll Holder
shaft on the Roll Ledge (b).
At this time, position the holder so that the R label on the
Roll Holder fl ange (c) is aligned with the R label on the
printer (d), as shown.
, If Paper is Soiled)
b
14
OK
d
b
a
c