Control Panel - Canon imagePROGRAF iPF650 Basic Manual

Parts

Control Panel

Name
a Display Screen
b Data Lamp (green)
c Message lamp (orange)
d Power button (green)
e Stop button
f Navigate button
g ► button
h ▲ button
i ▼ button
j OK button
k ◄ button
l Back button
m Menu button
n Load button
o Feed button
p Cut button
q Cut Sheet lamp (green)
r Roll Media lamp (green)
• To recover from Sleep mode, any button can be pressed except the Power button.
r
q
p
o
n
m
l
k
Shows the printer menu, as well as the printer status and messages.
Indicates the status of print jobs or the printer firmware.
Lit or flashes when messages are displayed. When the lamp is off, the printer is
operating normally or turned off.
Turns the printer on and off. The power button is lit when the printer is on or in Sleep
mode.
Cancels print jobs in progress and ends the ink drying period.
Enables you to check instructions for loading and removing paper or replacing ink tanks
or printheads, as well as other operations.
Press this button on the Tab Selection screen to move to another tab. In menu items
requiring numerical input, press this button to move to another digit.
Press this button when viewing menus to display the previous menu item or setting
value.
Press this button when viewing menus to display the next menu item or setting value.
Press this button on the Tab Selection screen to display the menu of the tab shown.
Pressing this button in menu items of each tab for which
to the lower level of the menu item, enabling you to execute menu commands or set
menu values.
Also press this button if the Display Screen indicates to press the OK button.
Press this button on the Tab Selection screen to move to another tab. In menu items
requiring numerical input, press this button to move to another digit.
Displays the screen before the current screen.
Displays the Tab Selection screen . (→
Press this button when loading or replacing paper.
(→ , Loading Rolls in the Printer), (→
Pressing this button when rolls are loaded enables you to reposition the paper.
Pressing this button when rolls are loaded cuts the paper.
Lit when sheets are selected as the paper source.
Lit when rolls are selected as the paper source.
a
OK
g
j i h
Operation
, Menu Map)
, Loading Sheets in the Printer)
10
b
c
d
e
f
is displayed at left will move