Replace The Printhead - Canon imagePROGRAF iPF650 Basic Manual

3
On the Tab Selection screen of the Control Panel , press
◄ or ► to select the Settings/Adj. tab (
• If the Tab Selection screen is not displayed, press the Menu button.
4
Press the OK button.
The Set./Adj. Menu is displayed.
5
Press ▲ or ▼ to select Maintenance , and then press the
OK button.
6
Press ▲ or ▼ to select Replace P.head , and then press
the OK button.
Ink is now fi lled.
After about two minutes, a message is shown on the
Display Screen instructing you to open the Top Cover .

Replace the printhead

1
Open the Top Cover .
Instructions are now shown on the Display Screen
regarding Printhead replacement.
• During Printhead replacement, do not move the Carriage from the position indicated. If you accidentally
move the Carriage , you will hear a warning tone, and Printhead replacement is no longer possible. If
you move the Carriage by mistake, close the Top Cover . The Carriage will be moved to the position as
indicated.
).
31
Replacing the Printhead
Ready
OK:Setting/Adj. Menu
Maint. cart.
Remaining Amount