Handling Precautions - Canon CR-S700R Instruction Manual

1 Important Safety and Handling Instructions
product's power specifications. Using an unsuitable
power cable may cause electric shock and fire.
 Make sure to turn off the product before
connecting/disconnecting power cables.
Handling
 Do not get the product wet. Do not insert foreign
objects or liquids into the product.
 Do not expose the product to strong shocks or
vibration.
CAUTION
Denotes the risk of injury.
Transportation/Installation
 Do not install the product on an unstable surface or
in locations exposed to severe vibration. This may
cause the product to topple over or fall down,
resulting in injury.
 Do not install the product in locations directly
exposed to salt water or where corrosive gases or
oily smoke are present. Contact with such
substances may corrode and degrade the
mountings, causing the product to fall down and
cause injury.

Handling Precautions

 Do not install the product in a location exposed to
high temperatures. This may cause malfunctions.
 Do not turn the camera head's rotating parts forcibly
by hand.
Forcibly turning the rotating parts may
・
damage these parts.
The camera rotator and the zoom unit's drive
・
parts can be rotated as necessary (only with the
product turned off).
Always use the compatible application or control
device to operate the product's rotating parts.
Maintenance and inspection
 Unplug the power cable from the power outlet
before cleaning it using a dry cloth. Cleaning the
power cable when the product is turned on or using
a wet cloth may cause electric shock.
 Do not use organic solvents such as alcohol,
benzene or paint thinner to clean the product.
 Do not disassemble or modify the product.
There are exposed electrodes and gears inside
・
the product. Contact with such parts may cause
injury or electric shock.
Foreign objects or dust entering into the
・
product may cause malfunctions.
In surroundings exposed to high temperatures
・
and humidity, humid air entering inside the
product may
condensation.
 When transporting the robotic camera head, always
use two people to lift it, firmly grabbing the handles.
Dropping the product may damage it and cause
injury and accidents.
Handling
 Make sure there are no people within the camera
head's operating range. The product hitting a person
may cause injury.
 Inspect mountings regularly (every six months to
one year) to ensure they are securely tightened.
Do not install the product in a position where the

lens or viewfinder is pointed at intense light sources,
such as the sun on a sunny day, lasers and other
intense artificial lights. Doing so may damage the
image sensor or the camera's internal components.
 Beware of freezing conditions. The product does not
have a freeze-proof structure so take precautions
when installing it in locations that may freeze. The
product may not operate correctly if frozen.
6
Handling Precautions
cause malfunctions and