3 System Connections
Connecting the Cables
Use the following diagram as a reference to perform the necessary connections. In this example, an Ethernet hub is used
for network connections to the control PC and an FTP server.
(5) LAN cable (supplied)
(4) USB Type C cable
(supplied)
CR-G100
IP Camera
Controller
(7) USB cable
Wide view camera
(commercially available)
Make sure to pass all the cables through the cable clamp.
Turning Off the Camera Head
Before connecting the cables, make sure to turn off the camera head.
Main capture camera
(commercially available)
(1) Head interface cable
(2) LAN cable
(6) N3 cable (supplied)
(8) USB cable
Eyepiece camera
(commercially available)
DC coupler
Robotic Camera Head
(3) Power cable
34
Connecting the Cables
CR-S700R
Zoom unit cable
(10) LAN cable
(commercially available)
Control PC
Ethernet
hub
FTP server
DC power supply
(9) Power cable
(commercially available)