System Connections; Preparations; Things To Check Before Connecting The System - Canon CR-S700R Instruction Manual

3 System Connections

3 System Connections

Preparations

 Things to Check before Connecting the System
Different connection types depending on the equipment used
The way to connect the system and the accessories needed will vary depending on the lens used, whether an optional
rain cover is used or not, whether the system is installed in the underslung position, etc. Carefully check the following
information.
Lens used
EF11-24mm F4L USM
*
EF16-35mm F2.8L III USM
EF24-70mm F2.8L II USM
EF24-105mm F4L IS II
EF70-200mm F2.8L IS II USM
EF100-400mm F4.5-5.6L IS II
USM
* When using the EF11-24mm F4L USM lens, vignetting may appear at full wide-angle.
** If the noise of the camera mounting bracket's bolts is a nuisance, you can use the lens supporter for EF70-200mm lenses.
Required Equipment
Prepare the following required equipment in advance.
 Main capture camera and lens that are both compatible with this product*
* Sold separately. For the latest information on compatible cameras and lenses, please visit your local Canon website.
 Gear ring (commercially available, A 9)
 Eyepiece camera (commercially available, A 9)
 Wide view camera (commercially available, A 9)
 Equipment required for installation
Secured without using the optional base plate:
•
Camera head fixation bolts (M8 / A2-70 grade or higher / x4)

Lens supporter
Shaft
type
A
(short)
Not required**
B
For EF70-200mm
lenses
(long)
For EF100-400mm
lenses
15
Zoom unit Rain cover
Attached Front cover
position used
Not
compatible
Rotator's
camera side
Front cover
Front cover
Rotator's extender for
subject side 100-400mm
lenses
Preparations
Installation in
underslung position
Camera Wide
mounting view
bracket camera
Attach to
the camera Attach
rotator's upside-
underslung down
position