Table of Contents
Advertisement
Notes on Handling the USB Interface (for Windows Users)
If installation of the printer driver does not proceed as instructed in this Quick Start Guide,
there may be a problem with the USB driver installation.
Try reinstalling the printer driver.
Reinstalling
If the installation still does not proceed as instructed, check the status of the USB driver
following the procedures described below.
Checking the USB Driver Status
If your printer is displayed with an
exclamation mark ( ! )
If Other Devices is displayed
If you cannot proceed beyond the Printer Port screen:
1
Click Cancel.
2
When the Abort Installation screen is
displayed, click Abort.
3
When the Terminate Installation screen
is displayed, click OK.
4
Turn the printer off.
5
Reinstall the printer driver (see page 8).
1
Ensure the computer and printer are
connected using the USB cable and that
the printer is turned on.
2
Select Start, Settings and Control Panel.
3
Double-click System.
If the System icon is not displayed for
Windows Me users, click on view all Control
Panel options on the left-hand side of the screen.
4
Click the Device Manager tab.
For Windows 2000, click the Hardware tab then
click Device Manager.
5
Double-click Universal Serial Bus
controllers.
• If your printer is displayed, installation is
complete.
• If your printer is displayed with an exclamation
mark (!), installation was not successful. Delete
and reinstall.
Double-click Other Devices if it is
displayed.
• If your printer or Unknown device is
displayed, installation was not successful.
Delete and reinstall.
Refer to the User's Guide for details on how to
delete unknown devices.
21
Advertisement
Table of Contents
